snips...
BTW they can be had from Gene Berg http://www.geneberg.com
for $20 each. I think I will use two on each flap to get plenty
of work out of them. (work = force times distance)
Paul Lamar
"Bass, Jerry" wrote:
When Cold, don't we want the doors closed? How can we have it both ways.
Jerry Bass
Yes. I see no problem there. Its done with the linkage. The only problem I
can see
at the moment, other than perhaps the altitude problem, is the temp in
the cowl might have to get near air-cooled engine temps or about 300 to
400 F to get full travel. I need to get one and test it to be sure.
Perhaps they are fully open at 200 F. I could always mount them near the
exhaust
or turbo of course.
Paul Lamar
I think they fully open at about 200F or so. (Water?) I should have one
around here to test.
Bill
Long EZ builder & pilot
BSME, MSME
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org