Big snip>

I'm am definitely not an expert on this subject, but I would like to

share my

experience over the last 2 days during which I completely disassembled

my 20B

    Bruce Turrentine is a master of rotaries and has produced an overhaul
video for the 13B, and at last conversation was almost finished with another
overhaul video for the 20B.  If it is as good as the 13B is, it should be a
BIG help to all those who are planning to be their own engine builder.  His
e-mail address is bruceturrentine@aol.com .  I don't remember what the exact
cost of the video was, but it was nominal.

Robin

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org