SNIP

Here is a close up of the turbo.

Paul Lamar

  Paul,

Looks like very little clearance between the turbo outlet and the starter
outboard bushing.   Is this an optical illusion or are you working on
a supertight bend and a heat shield.  Is this part of the 'great starter
location debate' ?

Bill
Long EZ builder & pilot
BSME, MSME

More than it looks Bill. Take a look at this view.

Paul Lamar

Paul,

OK now I'm drooling. Your mount looks great. What are you using for the back
mount onto the firewall. I'm assuming that you are using the firewall mount
design on your site. How are you going to connect the mount to the front
cover/back cover for aircraft. I have a '76 front cover which was four bolts
in rectangular orientation which were used as engine mounts in the car. I'm
going to swap the '87 cover with the '76. Any comments?

Ken Gillanders
BD4 Rotary Powered

Opps to answer your question. Yes I think that is a good thing to do.

I did not want to bother with finding an early front cover so I will 
try the pan bolt trick.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org