Subject: New Andair EFI valve
From: Paul
Date: 4/21/2001, 12:24 PM


SNIP
 > > How could it do that Russell and be sure it was evenly split?

 > Nobody claimed that the fuel returned to the tanks was evenly split,
just
like nobody
 > claims that the fuel drawn from the tanks is evenly split.
 >
 > In the hypothetical "both" setting, fuel would be disproportionately
drawn
from the
 > supply fuel line with the higher pressure and returned to the return
fuel
line with
 > the lower pressure.  The pressure in the lines is a function of the
ambient pressure
 > in the fuel tank and the height of the tank.
 >
 > Russell Kent


the pressure in the lines is also a function of the pressure DROP in the line
and the line length.  Use of a "both" valve in a low wing airplane is asking
for a fuel out event.  Please don't do it.  Lou Seno (locally) had an
emergency landing with plenty of fuel in the other tank, couldn't get it.
Lancairs have had the same problem.

Bill Schertz
KIS Cruiser #4045


Absolutely correct.   Please heed the advice to avoid innovation in fuel system
design.  Fuel systems DO NOT behave like you would expect them to without
a LOT of experience.  We have been over this many times on this list, but I will
still play the crank and try to keep people from hurting themselves.  There are
a lot of parts of your airplane and engine installation where you can
innovate like
heck and have a lot of fun and even make it better.   The fuel system design
is a really dangerous place to try new ideas.  Please take this seriously.

Bill Freeman
Long EZ builder & pilot
BSME, MSME

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org