Perry Mick wrote:

I took some measurements on a leading coil yesterday.
Primary resistance is 2.5 ohms, inductance 4.05 mH,
secondary inductance 67.1H.  This gives a turns
ratio of 129.  With 2.5 ohms in the coil and .33ohms
in the resistor, if you just hooked up 14VDC to the coil/
resistor and let it cook, the resistor would dissipate
8.44W.

My guess is what is really making the resistors fail
is maybe a dissipation approaching the power rating
of the resistor, combined with heat, a hot ambient
environment.  In fact, the power rating of a resistor
decreases with higher temperature.

Tracy Crook wrote:
Most of the meters knocking around these days are pretty inaccurate at the
low end.  Mazda specs the leading coil primary at .5 ohm.

I didn't think of looking in the book.  I used the same RLC meter to
measure resistance and inductance.  2.5 ohms sounded high to me
as the current developed wouldn't be that high.  We have a milliohmeter
at work so I'll try that on Monday.
--
Perry Mick
Duckt N7XR
http://www.ductedfan.com

Perry does it still look like a go for that KS flyin?

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org