Subject: Jack cox and the Wright brothers.
From: Paul
Date: 4/23/2001, 11:49 AM
CC: eaa editorial <editorial@eaa.org>, Tom Poberezny at EAA <tomp@eaa.org>, Dave Martin <dave@kitplanes.com>, Theresa Books at EAA <tbooks@eaa.org>


SNIP<
How neat would it be if we could buy off the shelf motor mounts
and other bolt on parts for our variety of rotary powered airplanes.
The EAA could help by more articles on rotary engines encouraging
small manufacturers including kit builders like Van's to provide parts.
The cafe foundation could be dyno testing rotary engines for wear
and durability and reporting the results as an objective independent
agency.

EAA is not doing as much as they should in these areas so it is up
to us and the Internet.

Paul Lamar

Amen!  I get more excited every day about this possibility.  We may not
agree on all the details but I'd like to thank Paul for his ideas and
facilitating the communication so necessary for making this happen!

Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com

Why thank you Tracy!

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org