marc wiese wrote:
Well, I don't know about all the designs that might be (im)possible and
dangerous to boot, but I envision the use of a "both" setting returning the
fuel to the 2 belly sumps that drain each left and right tank individually
a la the C177RG or C210 (in their latest and best iterations) on HIGH wing
aircraft. These 2 sumps are used for water sump drains collection, and for
venting purposes. Although elaborate, it seems like it could be made to
work, even if the sumps had to be enlarged for fuel flow return rates and
temp rise.
Marc Wiese
I would not do that if you are adapting that design to a low wing.
Paul Lamar
Marc,
Is this the system where they increased the fuel line sizes to
something like 3/4" to permit vapor flow 'upstream' back to
the mains from the sump? I have read that this was the
fix on late 210s to solve a random 'burp' of the engine,
apparently due to vapor buildup in the header trying to
counterflow uphill and momentarily blocking the fuel flow
downhill. They found this with extensive mockups with
transparent fuel lines.
Bill
Long EZ builder & pilot
BSME, MSME
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org