VO wrote:
Simplicity of TES allow to use sheet metal instead tubing. So far,
I believe I need INCONNEL sheets instead tubing. Also I could do
most of TES at my hangar.
Also I found some references on to old research on exhaust
systems and specially on tubing. Russian aviation industry found
round tubes usually on +20db side in comparison with square tubes.
Any comments?
Could you comment this? ^^^^
Brian Trube might check again at Boeing surplus in Seattle.
Other wise try any metal supplier such as http://WWW.twmetals.com/
On their web site they do not mentioned Inconnel. I call them and
talk with crazy "no-answer" type of sales-rep... :(((
Any how, do you know other source where I can call or look on web side.
Also I need to have 20B "one-plate" design for exhaust flange. Do you know
who produce such flange? Such solution will keep manufacturing of TES simple
and I could tack all peaces together my self and ask some professional
to TIG weld whole set.
Somebody made some Vlad. Al Gietzen perhaps. But I think they are all gone.
You will probably have to make your own.
If you do not know producer (manufacturer) of such flange, do you have
drawings for production and/or place where I could order such flange.
No drawings Vlad but here is how you makes a template out of Lexan.
Thank you very much!
Will keep you update on progress.
Vlad
N1UT
Inconel suppliers
Advantage * Randy Lobeck * 4270 Aloma Ave-124 Suite 33B * Winter Park, Florida 32792, USA * Telephone 407-678-1177 * Fax 407-678-7414 * E-mail:
advantage7039@aol.com * Locations in Florida, Virginia, Washington
Bestweld, Inc. * Ray Stubbs, Jr. * 40 Robinson St. * Pottstown, PA 19464, USA * Telephone 610-718-9700 * Fax 610-718-9800 * E-mail: rayman@bestweld.com *
Locations in Pennsylvania
REGAL INDUSTRIES * KRISTIN LUTZKE * 7250 C COMMERCE DR * MENTOR, OH 44060, US * Telephone 440-951-3031 888-910-9400 * Fax 440-951-9682 *
E-mail: REGALINDUS@CS.COM * Locations in Ohio
P.A.Inc. * Bob Countryman * 6626 Gulf Freeway * Houston, Texas 77087, USA * Telephone 713-570-4900 * Fax 713-570-4950 * E-mail: sales@painc.com * Locations in
Texas
Alloy Supply & Valve Co., Inc. * Nancy/Ron * P O Box 66356 * Baton Rouge, LA 70896, USA * Telephone 225-926-0163 * Fax 225-924-3802 * E-mail:
lokken@intersurf.com * Locations in Louisiana
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org