Subject: 2.85 Thrust Bearing parts.
From: Paul
Date: 4/30/2001, 8:26 AM

Ian & Irene Beadle wrote:

Builders using the 2.85 Ross drive might be interested in these pictures of the Jerry Bass thrust bearing addition. Note that because of variations between drives the 'top hat' bearing holder must be made to measure. Many thanks to Jerry for this idea.
Ian Beadle RV6A Western Australia.
beadles@webace.com.au


Hey thanks a bunch Ian. Good shot of the Ross 2.85:1 PSRU too with the Ford gears. 
Obviously you had these parts made down under. People may need copies of these 
so be prepared :-) Looks like a real simple and practical fix.

BTW guys Sony lowered the price on the Mavica 10X zoom 640 by 480 digital
camera to $400 US. IMHO this camera is ideal for internet work as 
it is an excellent compromise between resolution and file size.
The other neat thing about it is you can send the floppy disk around
and take an unlimited number of pictures on cheap floppy disk when
you go to an air show and read them in any computer without installing
special software. jpg's directly!

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

Jerry-Bass-thrust-cap2.jpg

Jerry-Bass-thrust-cap.jpg