Subject: large air cooled Wankel
From: Paul
Date: 4/30/2001, 10:36 AM


Obviously, it is possible to scale up a Wankel engine for relatively high
output
at lower output shaft rpm (ie 3000 or less). However, the Wankel is
demonstrably
a challenge for cooling, and as you scale any engine up, the heat paths become

larger, and air cooling less practical. Even with virtual "micro milling" of
cooling fins,
the WWII radials ran out of size, and went to "corn cob" cylinder counts. I
really feel also, that the power to weight ratio would adversly suffer. If you

halve the rpm at the same Brake Mean Effective Pressure, you have to double
the displacement. I think the big air cooled "direct" drive Wankel while
perhaps a good hope - is a faint one. - Vance

You confused the heck out of me there for a second. You obviously got your
clock fixed :-) Don't send any more messages until after 21:22 today :-)

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org