Subject: oil to water exchanger
From: Paul
Date: 5/1/2001, 9:58 PM


Standard conversion from HP to BTU's. Here is a double check.
Kilowatts to BTU's/second  multiply by 9.48 X 10 ^-1. One HP equals
.746 Kilowatt

1,101,465 BTU/hr sounds about right for the total fuel energy.
I think you are misinterpreting that to be the heat exchanger
capacity required.

Here is the heat balance chart again and the one page analysis.


Paul Lamar

Ed Anderson wrote:

Paul,

I calculate 1,051,572 BTU/Hr total at 180 HP.  Assuming Mike's 26.4 % for
total coolant heat rejection capacity needed = 279,199 BTU/Hr.  Figuring 1/3
of that for the oil cooler heat rejection = 93,066 BTU/Hr  which is fairly
close to the 95,000 BTU/Hr that Mike mentioned.  Based on fuel flow at 180
HP and 20,000 BTU/Lb gasoline.

Ed Anderson.

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org