Francois St-Germain wrote:

Hi group Does somebody here has already work on the
water pump to reduce is volume it is too big too fit
I need a smaller pump housing!
Thanks
Francois

Yes I guess it would be for a one rotor. I don't know of a smaller
one that could be adapted to a one rotor but I am sure there is
one out there somewhere.

Paul Lamar

   Francois,
     I have seen a Ford Fiesta (1979 to 1980+ model)
 water pump adapted to 12A rotary. I do not have the
 details but it required an adapter block (aluminum)
 between the pump and engine. I have a photo of this
 installation somewhere. Will try to find it and post.
     This pump worked but I can not tell you flow rate,
 etc. I acquired one of these pumps with the intent of
 installing on a 12A several years ago. The pump is very
 compact and light (aluminum housing).

     Kelly Troyer

Dyke Delta/13B Rotary Power

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org