Subject: 2.85:1 thrust bearing tricks
From: Paul
Date: 5/8/2001, 8:12 AM


"Bass, Jerry" wrote:

I do not think there is enough room for two bearings. The bearing
rotates
at
engine minus prop speed. as the bearing is on the sun to planet carrier.

Jerry Bass

Mark wrote>
Jerry, I didn't know you were on the ACRE's group, as I saw the details of
your 2.85:1 thrust bearing mod posted by some one else. Do you perform the
gearbox mods commercially? If I had known you were here I would have asked
your permission before I redrew your thrust bearing cap in CAD and posted
it
on the best practices site. If you don't mind me leaving up, I would
appreciate any other recommendations you have for improving the Ross
gearboxes.

"Bass, Jerry" wrote:

I posted the Cad drawing to Paul's Net, and also sent it to Ian, in
Australia.  Each Ross has different clearances and may require custom mfg.
I have not opened mine, about 12 hours, but will soon.  Go ahead, let
everyone make there own.

The photos on the Net from Ian, are like the one I built.  Yours may differ
as to the way Ross set the sun gear.  He had to machine the bell housing on
mine to clear. He even cut the outer edge of the seal to clear the bolt
heads.

Jerry Bass

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org