Subject: flying 700 nautical miles to cma
From: Paul
Date: 5/8/2001, 6:54 AM


Paul wrote:

You alluded to flying to Hawaii with a rotary. Is there any plans to do that
in the future?
Brian Trubee

Dale Smith wrote:

Who knows?  You've got to trust your airplane (and engine) a great deal before you
start flying transoceanic, but that is the only reliability level that I think
that anyone should shoot for!  Anywhere, anytime ... or how do the computer guys
put it?  5 Nines.

99.999 % reliable.

My point was just that one should prepare for a "Murphy's Law ... worst case
scenario" ... coolant leak when 1300 NM from landfall.  It would sure be nice to
have a shot at resealing it, before all the coolant was lost ... Paul's idea is a
great one that just might provide an emergency cooling capability.  This is sorely
needed.  A real life-saver.

Take it from one who has been there, "flying the ponds" is mostly just boring ...
especially with modern GPS navigation ... they have taken all the hard work out of
it.  Just sit back and enjoy the ride ... and manage fuel, and report positions,
and all the other fun stuff you've got to do to stay aloft and legal.

Just curious, though ...

What happens on this "worst case" failure, i.e. total coolant loss?  One could at
least "keep it running" on the way down, I would expect.  I doubt if it would
seize, for reasons mentioned here before ... differential expansion of metals,
etc. but, most likely,  every seal in the thing would fry ... eventually ... Could
this uncooled, crippled engine put out any useful horsepower at all?  And how
would it eventually fail?  Especially if it is still receiving 30% of its cooling
requirements from the oil cooling capacity, (now 100%) from a still intact oil
cooling system?  Melt into a pool of metal? ... I doubt it.

Here's hoping that no one gets to be the voice of experience.

Dale Smith

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org