Wrathall Mark wrote:

Mark wrote>
I migrated the ACRE's best practices web site to the space kindly provided
by the Cosmans on their server. Special thanks to Matt for his assistance on
this project.

The address is now (and will hopefully remain) www.rotary.microcosman.com. I
have replaced the site on my ISP with a jump page linking to the new site.
Keep an eye on the what's new page, as I am updateing the site roughly every
second day.

I have also added the recommendation to safetywire the tension bolts. I am
currently woking on a low wing fuel system recomendation summary, and will
do a coolant plaumbing page as well (unless someone else beats me to it).

Mark
www.rotary.microcosman.com

Mark. On the subject of tension bolts you might also mention the need to
coat them with RTV before installation. If your engine is already built
take the bolts out one at a time, coat them with RTV and replace and
torque them before you remove the next one. Do this in the order 
shown in the shop manual.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org