Subject: Oil control Teflon O-rings on the side of the rotor.
From: ACRE NL
Date: 5/12/2001, 8:41 PM


Hang on a few Don. The right O-rings exist. See this list from Creavey the
Manufacturer.
I will call them Monday and see if I can get the exact right size with Ken's
Powell's help.

Ken please look at the list and pick the size you think is closest. We will
get enough for Don as he is putting his engine together now.

In the meantime Don fashion a ring compressor using large hose clamps thin
sheet metal and old Mazda cast iron oil scraper rings. Probably a regular
piston
ring compressor would work using old Mazda cast iron oil scraper rings
to stabilize the top part. Take Bruce's advise and slightly chamfer the edge
of the rotor slot where the O-rings are inserted.

Paul Lamar


OK Paul, I'll give them another try with the ring compressor described.  I've
already ordered the original 0-rings in case these won't work.  Whoever said R
&D is expensive was RIGHT!!!  If you know what size O-rings I need for my 8
Wiggins let me know about that one too.
Thanks for the help once again!!!
Don Mitchell
Velocity / 20B NA

Absolutely true. R&D describes it to a T. We are on the cutting edge
here. Hopefully all this will help those that follow. It will also
take years to find out how well these things work. If they don't fail 
in the first ten years we will be ahead :-). 

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org