Subject: Air guides in ducts
From: ACRE NL
Date: 5/16/2001, 6:23 PM


Get one of those digital wind
meters and pump some air into the duct with a furnace blower.
Use the wind meter to survey the air velocity coming out of the
back side of the oil cooler. Here is my test set up for radiators.


Al Gietzen wrote:

There is a great deal of turbulence and non-uniform flow in the air at the
exit from a centrifugal blower, so to get meaningful results about flow
distribution through the radiator that will occur with straight-in air flow,
I'd guess you will need a straight section of duct with a length equal to a
number of diameters; say 6-8.  A couple of straightening vanes will be a big
help.

Al

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org