Subject: 2.85:1 PSRU RPM limit with heavy rotors.
From: ACRE NL
Date: 5/18/2001, 9:00 AM

If you have prior to 1989 rotors in your 13B engine and a 2.85:1 PSRU 
you need to limit your RPM to 6250 or this is what will happen 
to your rotor bearings. This could also be caused by overheated
oil.

1989 and later rotors are lighter so the RPM can go up to 7000 to 
7500 RPM. Use a larger dia. prop if you have landing gear clearance. 
You could also mill your rotors to lighten them if you have access 
to an NC mill. A re balance of the rotor will be required.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

frntrtrbrng.jpg