What did you pay for the stock O-rings?
Hello Paul,
I paid $8.23 each for the original mazda inner oil control o-rings and
$15.86 each for the outer oil control o-rings. That's $144.54 for the set
which I bought from MazdaTrix. I still haven't gotten to the point of trying
the TES coolant 0-rings. I'll try stretching them like you did when the
time comes.
Keep me posted !!!
Thanks,
Don Mitchell
John McLaughlin wrote:
Are the metal oil control rings part of a typical rebuild? At Mazdatrix's price of $50.82 a pair [$200 total], they would be nice to reuse. I don't have my manual handy - Is a spec given for them?
John McLaughlin
Yes there is a spec and it has to do with the width of the shinny part that
actually does the rubbing. I don't have it right at the moment however.
The drawback would be a bit more oil consumption.
Paul Lamar
Don't recall the shiny limit spec on the oil control ring, but it's 0.045" or so in width.. More wear than that and the oil ring quits scraping the oil off and starts riding up on the oil film. That's
when smoking commences. How about some ideas on improving this area. I've torn down more than one engine that probably would have gone another 100,000 miles if the oil control rings didn't have this
wear on the tapered face of the ring.
Roger Robertson
Try Mobil 1 or some other true synthetic in the crankcase. My test indicates it is somewhat
better at high temp (500 F) than regular motor oil. Less oil breakdown at high temps.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org