People have seen up to 1800 degrees F non-turbo. Lot depends on how you
lean
it. Tracy Crook has leaned his engine to 100 degrees lean of peak or more
and
seen the temps drop to 1500 degrees or so as I recall. Unlike a piston
engine
it is safe to do this as there are no valves to burn in case you
mess up and run at peak EGT for awhile. I run my O-470 50 degrees
rich of peak just to be on the safe side.
I think stock turbos are limited to 1650 F or so. With an Inconel
wheel I think the number is around 1750 or 1800 degrees F.
Rob Weinstock wrote:
Is the lean-burn setting preferred for reduced fuel consumption?
Also, what mixture seems to produce max power?
Thanks, interesting stuff!
Regards,
Rob
Tracy has a real handle on this as he has all three; fuel flow, EGT and an
O2 sensor. Tracy?
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org