tom jelly wrote:
http://www.dinanbmw.com/html/danger_of_power_pulleys.htm
Old customers of mine.
Paul Lamar
Scott Speirer wrote:
Yes, I think this is a good article. The pictures and diagrams do help explain the
concepts. I didn't realize that the amount of twist of a crankshaft is a function of
the distance from a fly wheel or load. It makes sense though, considering that the
steel is behaving as an elastic material under these conditions.
I'll ask the following question, letting all know that I don't have a good picture of
how the RX-7 manual transmission works: where is the harmonic damper in the manual
transmission system? I know there is a clutch plate with springs, but I thought its
use was mostly when the clutch is being engaged.
Scott
That's it Scott. There is no harmonic damper per se. The e-shaft is far to
stiff to need one. Nobody has ever broken an e-shaft and this includes
getting up to 800 HP out of a turbo 13B. Even the four rotor with the same diameter
shaft does not need an harmonic damper. That engine had 690 HP normally aspirated.
Again they never broke an e-shaft to my knowledge.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org