I'll ask the following question, letting all know that I don't have a
good picture of
how the RX-7 manual transmission works: where is the harmonic damper in
the manual
transmission system? I know there is a clutch plate with springs, but I
thought its
use was mostly when the clutch is being engaged.
Scott
That's it Scott. There is no harmonic damper per se. The e-shaft is far to
stiff to need one. Nobody has ever broken an e-shaft and this includes
getting up to 800 HP out of a turbo 13B. Even the four rotor with the same
diameter
shaft does not need an harmonic damper. That engine had 690 HP normally
aspirated.
Again they never broke an e-shaft to my knowledge.
Rob Weinstock wrote:
Starting in 1989, Mazda added a harmonic damper in the manual transmissions.
It is relatively small, and is located inside the tailshaft housing.
Regards,
Rob
Right you are but I think that is more for drive train torsionals.
It does not have the same function as a torsional damper on the nose
of a crankshaft. In the later case the damper is used to keep the
crankshaft from fatiguing and cracking. The heavy flywheel isolates
e-shaft torsionals from drive line torsionals.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org