Bulent Aliev wrote:
Hi Paul, here is a installation of the little pump like one I sent you in a
peluber application.
Bulent
Bulent:
Here is a quick pic I took with my wife's digital camera, with some
text thrown in for explanation. Preluber works great. I installed an
automotive 30 AMP relay with a momentary-contact pushbutton in
the driver's compartment. I turn the ignition to the "on" position to
power up my oil pressure gauge, hold the pushbutton until I see the
GP-301 pumping (approx 40-50 PSI I'm guessing), wait another
few seconds for the oil to get everywhere it's supposed to, let go of
the pushbutton and start the truck. The oil pressure actually stays up
for several seconds after I let go of the button, so it's still at ~ 40 PSI
when I start the engine. Works great! Thanks for all your help.
Regards,
Ken
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org