Subject: Road & Track article on side port
From: ACRE NL
Date: 5/29/2001, 8:57 PM


Bill Freeman mentioned this about a week or so ago.
The June issue of Road & Track page 81 has a very positive article on the
new side exhaust port engine.
This is one of the illustration from the article.

Paul Lamar


Roger Robertson wrote:

The side port sounds plausible but there's going to be a whole lot more heat
collected in those sidewalls with sideport exhausts. Speaking of heat,
couldn't one install a watercooled sparkplug base to help with the heat
dissipation.  Ex- Sandia Lab employees in Albuquerque are making some progress
on plasma injectors for multifuel military engines and are sharing info with
us.  I suggested using the rotary engine and cooled plasma injectors, but then
maybe that's what Atkins is doing.
Roger Robertson

The heat flux problem is right down next to the combustion chamber.
By the time the heat flux gets out by the spark plugs it has cooled
off quite a bit. The proplem is transfering the heat to the water
from the inner water jacket metal. The engine needs more fins inside the 
water jacket if you will. Racing Beat has such a modification.
Heating the side ports will not be a problem. That side of the
engine runs too cool anyway.

Paul Lamar

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

heat-trans-cyl-wall2.gif

housing-temp-vs-h2o-temp.gif

rotor-house-heat-dist-d.gif

side-wall-temp.gif