"Bass, Jerry" wrote:
Now I have about 21 square inches inlet to the Oil cooler. It looks
like
a
guppy. Mine is vertical, and Ed's is horizontal. I have increased the
air
to the oil cooler and removed the internal deflectors. I also changed
the
duct to bell shaped like you suggest.
I will also increase the water/Air inlet. You say about 60 sq. in. for
both.
Now is the time to do all of this. My engine will come back this
week,
I
hope.
Jerry Bass
So that is 120 square inches total for both water coolers right Jerry?
Each cowl cheek opening is about 6 by 10 inches is that correct?
I am just trying to picture this.
I think the oil cooler opening may still be on the small side depending
on how could the duct is. How big are your air outlets under the back
bottom of the cowl? Is there a 3 inch or larger radius on the firewall
just above the air outlets?
Paul Lamar
Ed Anderson wrote:
Paul,
I suspect the 60 sq inches refers to the total for both water radiator
inlets - like 30 sq inches apiece. Mine are approx 24 sq inch each and I
would be hard pressed to put 60 sq inch openings on each side of the
spinner. It will be interesting to see how effective the vertical opening
for the oil cooler works compared to the horizontal one. I suspect the
air
velocity distribution across the opening from the spinner to the outer
limits of the opening will vary considerably on the ground due to the
propeller - may not make any difference in the air.
Let us know how it goes, Jerry
Ed Anderson
Ed
"Bass, Jerry" wrote:
Ed is correct, I have 7" dia round openings for the water coolers now (38
sq. in.)each. I have to modify the ducts behind the openings yet.
This is the first I have seen about inlet area, thanks.
Jerry Bass
The round sounds good Jerry. Some of the fast RV guys are using airfoil shaped
machined aluminum inserts that they claim are worth 20 degrees on an air cooled
engine. These are connected to the duct with tubes made from wet suit material
and large hose clamps.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org