Subject: Air guides in ducts
From: ACRE NL
Date: 5/30/2001, 7:55 AM



"Bass, Jerry" wrote:

Now I have about 21 square inches inlet to the Oil cooler. It
looks
like
a
guppy. Mine is vertical, and Ed's is horizontal.  I have increased
the
air
to the oil cooler and removed the internal deflectors.  I also
changed
the
duct to bell shaped like you suggest.

I will also increase the water/Air inlet. You say about 60 sq. in.
for
both.

Now is the time to do all of this.  My engine will come back this
week,
I
hope.

Jerry Bass

So that is 120 square inches total for both water coolers right
Jerry?
Each cowl cheek opening is about 6 by 10 inches is that correct?
I am just trying to picture this.
I think the oil cooler opening  may still be on the small side
depending
on how could the duct is. How big are your air outlets under the
back
bottom of the cowl? Is there a 3 inch or larger radius on the
firewall
just above the air outlets?

Paul Lamar

Ed Anderson wrote:

Paul,

    I suspect the 60 sq inches refers to the total for both water
radiator
inlets - like 30 sq inches apiece.  Mine are approx 24 sq inch each
and
I
would be hard pressed to put 60 sq inch openings on each side of the
spinner.  It will be interesting to see how effective the vertical
opening
for the oil cooler works compared to the horizontal one.  I suspect
the
air
velocity distribution across the opening from the spinner to the outer
limits of the opening will vary considerably on the ground due to the
propeller - may not make any difference in the air.

Let us know how it goes, Jerry

Ed Anderson

Ed

Ian & Irene Beadle wrote:

The RV6A has about 24sq" each side as standard. My air cond rads are
9"x10"X2.5" close to, and parallel to the openings.Cooling did not work
until I added outlet slots on either side of the cowling in the low
pressure
area. Inlet to the oil cooler is only 3" diameter and is OK for level
flight. More test flying soon, I'm still a bit nervous after having the
front leg collapse.
Any more news on the noise abatement? Mine has got to be fixed before I go
deaf!
Ian Beadle.

Got any picture Ian?

Tracy came up with something that works pretty good. What is the latest
on this Tracy?

Paul Lamar

"Bass, Jerry" wrote:

Please remember, that Tracy's muffler is about 40" long.

Jerry Bass

Why do you think that is a problem Jerry? It does not appear to add much drag.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org