Subject: Air guides in ducts
From: ACRE NL
Date: 5/30/2001, 9:04 AM


Ian & Irene Beadle wrote:

The RV6A has about 24sq" each side as standard. My air cond rads are
9"x10"X2.5" close to, and parallel to the openings.Cooling did not work
until I added outlet slots on either side of the cowling in the low
pressure
area. Inlet to the oil cooler is only 3" diameter and is OK for level
flight. More test flying soon, I'm still a bit nervous after having the
front leg collapse.
Any more news on the noise abatement? Mine has got to be fixed before I go
deaf!
Ian Beadle.

Mike Wills wrote:

Ian,

  3" diameter for the oil cooler inlet seems pretty marginal to me. It
appears that 20 to 30 square inches seems to be the norm for most of the
flying installations. 3" diameter is only 7 square inches. I'm surprised it
cools at all. Are you using the stock RX7 cooler? What are your ambient
temps where you are located? And what do you see for oil temp in climb?

Mike Wills


The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org