Subject: Knock sensor for the 13b
From: ACRE NL
Date: 5/30/2001, 4:15 PM


Rino Lacombe wrote:

Hi Paul,

I think that I should install a knock sensor on my 13b since it is turbocharged.

Anyone having info on this would be greatly appreciated.  Where is it available?

I would prefer a unit that display the information with LEDs instead of sound.

Thanks

Rino


That's a problem as sound is, I think, the best way to do it.
The human brain is an excellent real time audio signal processor.
Witness the problems computers have in recognizing speech patterns.
My idea is use an audio amplifier hooked up to the knock sensor.
Not as quick as a computer in retarding the ignition however.

Rumor has it that once it knocks it is too late to save the apex seals.

Knock is a very strong function of intake air temperature.
The very best you can do is install an air temperature
sensor in the intake manifold and never let it get over
130 degrees F. That is why I am working on squeezing in an extra
large intercooler.

Paul Lamar


Rino Lacombe wrote:

Thanks Paul,

I have the stock Mazda intercooler.  I have an intake manifold air temp sensor and
gauge.  There is also a temp sensor on Tracy's EFI controller, I don't know what this
does to the timing, it may retard the timing with a rise in temp.  I guess the knock
sensor would be mostly useful for the testing periode.   When I know the conditions
required for producing a knock, one can avoid these conditions.  My guess is that the
fuel octane level, timing, boost pressure in the manifold and intake air temp have an
influence.  Do you know other factors.  I have an intake manifold pressure gauge.   I
don't need to take any risks, I want 200 hp at takeoff and that will not stress a
turbo 13b.

Rino

I am a bit worried about turbine RPM at altitude so I am thinking about
a turbo tach.

That is more or less the approach I am taking Rino. I will sneak up on the
HP and the boost level to explore the limits. I hope Greg Richter will send us
some data soon on his turbo set up :-) Right now he is out there on the 
cutting edge but it looks like he is well equipped to deal with it :-)

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org