Subject: Grand Rapids EIS engine monitor for 13B
From: ACRE NL
Date: 5/31/2001, 7:54 AM


<< Perry Casson wrote:

Hi All,

For anyone considering an electronic engine monitor for their 13B
install
you might be interested to know that the guys at Grand Rapids
Technologies
<http://www.hometown.aol.com/enginfosys> are writing a "Rotary" version
of
the EIS firmware. The changes they are making is to provide optimal
displays
for the engine params we are most interested in and removal of display
fields for things like CHT.  I don't think they plan to charge extra for
this, you simply have to ask for it when you order (or at least that was
the
deal I got ;-)

Example Parameter Display:
RPM                     EGT 1                   EGT 2
Oil Temp/Press  Cool Temp/Press Fuel Press

2240  1352  1404
192/65 210/19 67

Perry Casson


It would be really neat if they would make it work with Tracy's EC2 and
include fuel flow...  I would sell my Rocky Mountain and buy one if they
would do that.  Maybe someone could contact them before it is too late.
Tracy?

Dave Leonard

"Bass, Jerry" wrote:

I asked for and got a GRT EIS with code changes for CHT = H2O, AUX1= BLOC,
AUX2= H20p, etc.  I would ask for submersed water temp probes, rather than
external like CHT for around the spark plug.

changes like this keep the pilot's workload down. No need to keep cross
referencing.

Jerry Bass

We really need CHT's. A couple of small holes drilled along side
the leading spark plugs down to within a couple of mm of the combustion
surface  with temp probes would be ideal. That is the REAL bottom line
on the limiting temperature of the rotary engine. Not the water temp.
This is what NASA did but the thermocouple should be moved around
closer to the leading spark plug according to this temp chart
from Mazda.

Paul Lamar

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

thermalcouple-location.gif

rotor-house-heat-dist-d.gif