Subject: Rapco dry air pump
From: ACRE NL
Date: 6/1/2001, 9:45 AM


Does that A/C pump run at alternator speed Greg or is there a gear box in
there?
Do you need to buy the alternator from them or can you adapt it
to any alternator? That would solve some problems for me as I have no
room for a smog pump (used as a vacuum pump). Lighter weight too.

Kind of a brilliant idea as the alternator bearings replace a bearing
adaptor that one would have to make if one were driving and aircraft
pump with a v-belt.

Here is are a few interesting old messages on the subject in no particular
order.
Paul Lamar

Greg Richter wrote:

The alternator is from a 1981 Chevette Diesel.  We made a simple aluminum
plate to mount on the back, took the plastic pump drive that came with the
Rapco and reamed the drive bushing to press on the alternator shaft.  All
in all, about 2h work.

The Chevette alternator has a larger than typical drive pulley since the
engine had a larger than typical crank pulley.  With the stock Mazda
eccentric pulley, it slows the pump down precluding the need for a gear drive.

Every once in a while, you get one that works the first time ....

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org