IMHO the 89-92 stock Mazda gen II turbo with built in waste gate
and water cooled bearing housing is a real bargain in a turbo aircraft
engine.
John Slade wrote:
Great, but this unit wont fit on my '93 REW engine. Or will it?
John Slade, Cozy MKIV #757, progress: http://kgarden.com/cozy
West Palm Beach, FL
Sure will John. And make a really great combination I might add.
You will enjoy all the beef ups of the late turbo engine with the most durable
turbo setup Mazda ever made. Will work extra good in a pusher
as that puts the turbine housing at the back of the airplane where the
exhaust can go straight out. Mine must make a 180 degree turn and go out
the side of the cowl.
You might have to modify the turbo oil drain back plumbing slightly as I think
the REW front cover is slightly different then the 2nd gen front cover.
A second gen front cover will probably fit the REW engine if you choose
that route.
I got a complete unit including exhaust manifold in excellent condition from http:/www.japperformace.com in Sydney for $250 US. Snap them up while you still
can.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org