Paul,
87 NA center housing width parallel to E-Shaft measures 50.0 mm.
Ed. pebvjs@aol.com
OK guys what is the width of the 93?
John Slade wrote:
I get 1 15/16 using a tape measure. I don't have an accurate measuring
device.
15/16 = .9375 and there are 25.54 mm in an inch
so 1.9375 X 25.54 = 49.48 mm
1/2 mm diff! Hmmmmm! I would say they are the same. Anybody out there with a
metric tape measure and a 2nd gen center housing?
Looks like the 89-92 turbo's will fit the later engines. A combination made in
heaven.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org