mike h wrote:
>
> Don't know if this helps, but at one time I had a volvo intercooler that
had
> a 3" core, was about 16" long, and was configured as a loop (inlet and
> outlet on same end) that used 2.75" pipe connections. If you're
interested,
> I can try to research what model it was from.
>
> Personally I am using an intercooler from a Mitsu Starion, but I have a
lot
> more space under my hood than y'all do under the cowl.
>
> Mike Harrington
Thanks Mike. That sounds just about perfect. Are you sure it was 2.75 and
not 1.75 inch in diameter inlet and outlet pipe? 2.75" sounds huge as
the Mazda is only 1.75 inch in diameter.
Paul Lamar
mike h wrote:
2.75 or possibly 3. It was HUGE.
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org