Subject: Dave Anders turbo charged SIO-550
From: ACRE NL
Date: 6/7/2001, 12:53 PM

Had lunch with Dave and Diane at SZP yesterday and 
had a chance to ask him some questions on his dual turbo charger
set up in his top qualifying 330 MPH reno racer Questair Venture. 
Unfortunately the prop governor failed at 3000 RPM and he crashed.
There will be an article in an upcoming EAA Sport Aviation
mag about the crash.

He is currently running a 6:1 compression ratio. Plans are to
go down to 5:1. The intake temperature out of the dual intercoolers
is 190 to 205 F so anti detonation fluid is called for.
63 inches of Hg is seen or about 15 psi of boost if
my conversion ratios are right. That would also be around
30 psi absolute. Estimated HP is 550 with a 850 potential.
Fuel flow is around 60 gph. EGT's are 1700 degrees F.

I also asked Dave how the motor mount was working out and both he
and Diane, who is also a pilot, said it was the smoothest piston
engine airplane they ever flew in. Not only that the mount survived
the crash. Dave also gave me the procedure for setting
the thrust line angle for optimum speed. You make a chart 
and record the number of turns on the strut as a function
of MPH until you pass the optimum and then back off.

Here is a picture of my rear motor mount that is similar
to the Questair rear mount as are the fronts pf course. 
Not quite done as I have to cosmetic up the angle aluminum 
brackets bolted to the firewall.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

rear-mount5.jpg