Subject: Grand Rapids EIS engine monitor for 13B
From: ACRE NL
Date: 6/7/2001, 2:43 PM


Ian & Irene Beadle wrote:

I would also like to build a digital fuel flow monitor.
Ed. You say your injection system 'stages' at 3000rpm. At what manifold
pressure does it stage?
Ian Beadle. Still testing RV6A.

Ed Anderson wrote:

Ian,
    The injection system switches on the secondary injectors at roughly
2500-2700 rpm in my installation.  However,  the staging is actually
triggered by the manifold pressure and I believe it is approx 22 inch Hg.
This is using Tracy Crook's EC2 injection system and you can change the
staging manifold pressure point by reprogramming that function.  I have
flown on both the primary set and secondary set of injectors alone and there
is still adequate fuel flow from one set -at least up to around 5500 rpm .

Ed Anderson.

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org