Subject: Handy trick for timing your engine ignition.
From: ACRE NL
Date: 6/10/2001, 12:38 PM

Most aircraft installations of the rotary make it hard to time
as the front of the engine is too close to the firewall.

Make a pointer for the back of the engine and set the
timing marks on the front pulley to the timing pointer on the
front cover. Than use White Out to mark the flywheel.

Much more accurate than trying to set the timing using
the marks on the front pulley. With most PSRU installations
the flywheel is quite accessible.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

flywheel-timing-mark.jpg