Subject: Ian Oil Temps Pict 1
From: ACRE NL
Date: 6/14/2001, 7:37 PM

Ian & Irene Beadle wrote:

I finally put a thermocouple on the outlet of my RV6A oil cooler.
The temperature drop across the cooler varies a bit with inlet temp. but is around 30 degrees C. The sump temperature gets up to 115C on climb at 1000 ft/min. Ambient 25 C. The water stays around 80 to 90. I haven't done any high power runs yet but indications are that this is one quick aeroplane. I am swinging a 72"X81" propeller. 2.85 drive. RPM at start of ground run 5800.
I have sent some more information on the mixture indicator. The components added to the input area are a clamp I found necessary to protect the IC.
Ian Beadle
beadles@webace.com.au

Ian sent a bunch of pictures and scans so I will up load those one at a time
as they are so large in total.


30 C is 86 F
25 C is 77 F
80 C is 176 F
90 C is 190 F 

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

engine1.jpg