I bought an aluminum rad from C&R racing for $330 (that includes shipping).
AN 16 outlet and inlet, with a small air bleeder in one end.  It's 18"x25"x2
1/4" thick.  Quite a bit larger than required, but I don't think I'll have
any cooling problems if I get the ducting right.
 Brian Trubee
Redmond, Wa

Sounds good to me Brian.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org