> > Ed Anderson
"when I was using the 5" duct I was using a 8x11x1" EARL oil
cooler near the firewall and while I built a large plenum to diffuse the
air
it just would not do the job on those hot days.
5 inches diameter or 20 square inches of opening is 22% of 8 x 11
almost the exact rule of thumb for a rad opening.
I always thought Ed gave up too soon on that set up :-) It had a real nice
snorkel intake design after he eliminated the NACA duct. I was hoping he
would move the cooler away from the firewall to free up the outflow air
and improve the transition from round 5 inch rubber ducting to the 8x11x1
flat oil cooler with a bell shaped duct. We were making progress Ed and
you used a sledge hammer :-)
Perhaps my expectations are too high. Perhaps we need to learn to walk
before
we can run. First order of business is get it to cool. Use the sledge
hammer
if necessary :-) After just about everybody can do that then we can start
to worry about drag. IMHO that prize money for the fastest rotary over 200
mph is going to stay in the bank for awhile and collect interest :-)
Paul Lamar
Won't disagree with you, Paul. Your suggestion of the snorkel intake
did indeed improve my oil temp situation from a "Can't fly - oil too hot" to
a " can fly almost any day but a 90F+ day" and even on those days I could
fly but had to keep eye on oil temp all the time and particularly in a
climb. Moving the oil cooler further away from the firewall may have been
just the ticket to making that approach successful. But, as much as I hate
fiberglass work - after hearing that Jim Mosur's approach drop oil temps
40F, I just had to get out the sledge hammer {:>).
A related point. If you make an engine mod and start making more HP, you
will find out how much excess cooling capacity your system has. I was
surprised to see my oil/coolant temps with the 91 Turbo II block run approx
10F over the temps for my 86 block. But, the reason is my 86 probably did
not ever produce more than approx 130 HP and the 91 is producing close to
175HP. So more power (and yes, I use it {:>)) = more waste heat to get rid
of.
Ed Anderson
That may have been Perry's cooling problem when he got the overhauled engine
in his airplane out in Palm Springs.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org