Mark Steitle wrote:
Does anyone know about this incident near Marana, AZ involving a Lancair ES
powered by a marine LS1 Chevrolet. It appears the psru failed resulting in
an off-field landing.
Date: 6/19/01 11:52 AM
From: Don Parsons
I keep track of these to see if there is anything I can learn from them....
On Sunday March 4th in AZ, there was an incident involving and ES and an
off-field emergency landing. The pilot only sustained minor injuries. The
passenger was unharmed.
http://www.ntsb.gov/NTSB/brief.asp?ev_id=20010308X00562&key=1
-------
Don Parsons
Yes I think we mentioned that on here. As I recall Mick Myal was in
the airplane as a passenger :-) How ironic! I saw the plane at Copper State
last year and thought the installation very unsanitary indeed.
Paul Lamar
Bill Freeman wrote:
Paul,
Do you remember if the PSRU was a belt with no outboard brg on the
crank pulley? This is starting to really bug me, as it is clearly a serious
design deficiency, yet MANY belt PSRUs do it. We really need to
repeat that this is generally an unsafe practice due to high side loads that the
crank and bearings were never designed to handle.
Bill Freeman
That airplane is kind of a blank Bill. All I remember is the duct tape
and bailing wire.
That bearing situation applies to chains as well.
Another one of the reasons they are heavy.
BTW I just checked my Marks ME Handbook and you are going to play hell getting
a 200 HP chain drive with a 6000 RPM input sprocket to work. They are primarily
low RPM or low HP drives. Not both at the same time. I know the auto people have
done it but they don't run 6000 RPM for long. Perhaps the titanium chain
is going to help.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org