Ian & Irene Beadle wrote:
I had a look at a very successful 20B race car today that uses Redline
synthetic oil at 500:1.
I switched to Redline 'Water wetter' from glycol and
it works. No good for cold climates, but then you Eskimos don't have cooling
problems.
Throwing all the solid alluminim tubing out tomorrow.
Ian RV6A 13B.
IMHO he is asking for serious problems. Is it a drag racer where the
engine runs for only 8 seconds? The function of the that apex seal oil
is primarily to cool the apex seals and then lube them. If you cut
the volume you cut the cooling effect As shown in this Mazda SAE paper
chart. Also it better be Redline 2 cycle oil as not all synthetics
burn cleanly.
I add one ounce per gallon of 2 cycle oil to the tank of my wife's 1983
RX7 despite the fact the injection pump and oiling system is probably
still working. No noticeably effect on the ignition.
What do you mean Ian by "Throwing all the solid aluminum tubing out tomorrow."
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org