Monty Roberts wrote:
Hello fellow rotor heads,
I just signed on to this newsletter recently. I am planning on building either a single rotor vari ez, or a two rotor long ez. I have engine parts and am currently in the mock up/ design stage. I will be developing and ground testing the engine first, and then will look for an ez project on which to bolt it.
Although the thought of making a new e-shaft, tension bolts and the like does not thrill me, I REALLY like the vari for its speed and simplicity over the long, and the two rotor is just too heavy to put in the vari. Plus I could DOMINATE at Jackpot with a 1 rotor vari based on the V^2/in^3 standard of performance measurement. They are all running 200 in^3 and larger engines, with a 1 rotor I would only have 40 in^3!!! I could putt around at 100 knots and still win!! I'm not sure that they would allow me to compete more than once though ;-)
I was wondering if anybody has done any work with the vibration isolators built by Lord and Lovejoy. They are designed to couple various things to the flywheel side of an engine. They come with various damping/spring characteristics and look to be Ideal for placing between the gearbox and flywheel. I would love to use an existing redrive if one would fit, BUT...... Tracy's redrive is not long enough to give me the proper CG and prop location. Plus If I go with the single rotor solution it is a bit heavy. I like the Ross unit except for the spring hub and other problems. I will use a planetary drive with the ubiquitous Ford parts whether I design it or buy it.
Other Issues:
peripheral or standard port
if a single rotor, what computer to use
whether single or two rotor, I will build a new front cover with integral aluminum water pump/ thermostat. This will let me put the coolant/oil outlets where I want them, plus save weight and space.
What type of crank angle sensor to use. I will definitely replace the distributor-type with a lighter, more accurate crank trigger.
How much metal can safely be removed from the front of the rotors
Sizing of an oil/H2O cooler
on and on and on......
Regards,
Monty
Monty Roberts
RMI
1795 Berry St.
Fayetteville, AR 72701
tmrbrts@swbell.net
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org