Russell Kent wrote:
Monty Roberts wrote:
If sized properly, the oil/water exchanger will absorb enough heat.
You mean "if sized properly, the oil/water exchanger will cool the oil sufficiently." Nobody disagrees.
The temperature of the H2O/glycol coolant entering the main radiator is also increased when using a water/oil exchanger, thus increasing delta T and therefore main radiator efficiency.
Yes, the oil/water exchanger increases the delta T at the water radiator. Yes, increasing the delta T will increase the BTU/second transferred (all other variables held constant). The question is: what will the water temperature be at the radiator outlet? You see, the radiator's BTU/second transfer rate increases as the air/water delta T increases, *but* that
increase does not keep pace with the water's increasing BTU *content*. So your radiator outlet temperatures could be too high, meaning you have to change some of the other variables (more air or a different [larger] radiator).
Less ducting and plumbing means less weight/drag and complexity. Therefore, this is the design I will pursue.
Be certain to size your ducting and radiator to transfer the combined heat load (coolant & oil).
Russell Kent
One third more (area, volume, air etc.etc..) for the main rad. There is no
free lunch.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org