mike h wrote:
One of the things that popped in to my head today... if tuning the exhuast
primnary helps the scavenging of the chamber by timing the pulses to create
more suction, can the same principle be applied to the turbine manifold? IE
tuned length tubular manifolding? The mazda unit is primarily a cost and
packaging issue, but in a custom application it would seem that longer than
3" or so would help.
On another note, anyone got a link to a site, or a decent calculus 101 level
book reference, to tuning intake pipe length and diameter vs. RPM and
whatnot? I remember seeing a simple java calc on someone's web site long
ago, but that might have been up to 5 yeaars ago.
Mike Harrington
Yes it can and some do it that way. The problem for most aircraft is
the space required, the heat and the cost. Here is a picture of one
Paul Yaw did for a float plane.
Here is a little back ground data on intake manifold tuning.
This is for a piston engine but the rotary works in a similar fashion
with different pipe length and diameter numbers.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org