Subject: NGK sparkplugs(colder heat ranges)
From: ACRE NL
Date: 6/22/2001, 1:25 PM


The race plug is NGK R6725-115. These cost $25.00 each and are stone cold.
This is a retracted tip plug. We run them because we get them for free. Not
too long ago I had to pay for this stuff and then I used Champion N57G.

Medium extended tip gold electrode Medium heat range.  The N57G is long gone
now and the replacement is the N80. A bit hotter, and maybe a good choice for
aircraft is the N82. Much hotter than the N82 is the N87. Even then the N87
is colder than a street plug. Paul Yaw was testing Autolight plugs and
getting good results. I ordered a set through NAPA for under $6.00. AR2592
looks just a bit warmer than the Champion N80, and colder than the N82. I
have not run these yet, but would not hesitate to install them and race on
them. You need to get a heat range chart from each manufacturer to compare
heat ranges. It is not surprising that the local motorcycle shop stocks plugs
that work well in rotaries. You need 3/4" reach with retracted or medium gap.

These are used in smaller dirt bikes, and are much cheaper than "racing"
plugs. There are many people in racing who know nothing about heat ranges. I
noticed a team having trouble melting the threads out of plug holes. They
came looking for inserts to save the head. He produced a street heat range
champion with the ground electrode half gone and the cement boiled out of the
center electrode. I gave him a set of used NGKs, for his spare head and
explained his problem. He has never had a problem (with plugs) since. The
heat range is governed mostly by how far down inside the insulator goes
before it contacts the shell. The long white cone indicates high heat range.

That means the electrodes and the insulator will operate at high temperatures
and help keep carbon buildup off of the insulator. A cold heat range plug
will have the insulator join the shell very near the end of the shell. The
heat picked up by the electrodes is conducted into the shell and carried away
by the rotor housing (head), so the electrodes run cooler.

The down side is that there is less insulator to get carbon buildup onto
before it shorts out, (fouled plug). When running the RX-2 with two stock
distributors and points we didn't foul plugs. I would pour motor oil and hot
coffee into the engine the get it started, and still it wouldn't foul a plug.
( the engine was from a junk yard and had zero compression). I would think
that with a rotary in fair condition and a modern ignition system, that plug
fouling would be unheard of, regardless of plug heat range. The piston engine
racers warm up the V8's with street plugs then change to race plugs while the
engine is hot. I think this is hogwash. These cars run the big MSDs and
Mallory Lasor systems. You couldn't foul a plug with a court order on one of
these cars. That is almost all I know about spark plugs. The rest I can't
remember.
Lynn E. Hanover

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org