Subject: Oil Filler and dip stick.
From: ACRE NL
Date: 6/22/2001, 8:35 PM


Good point about the dipstick. I've got two ideas about that. One is to cut
50 mm off of the dipstick tube and cut two inches off the bottom of the
dipstick. The other idea is to obtain an oil check window off of a Kawasaki
motorcycle. I had a "78 KZ650 and instead of a dipstick it had a  ~3/4" dia
window in the side of the crankcase where you could visually check the oil
level. I'm sure that you could get one of these new or off of a wrecked bike
for cheap. It's a matter of drilling the right size hole and pressing it in
place(if you are making your own pan, that is.)

Brian Trubee
Redmond, Wa

Is it plastic or glass Brian? Seems like it needs to be glass to with stand
the heat.

Paul Lamar

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org