In regards to putting in a remote oil fill, you can put one in the pan, but I
was also thinking that you could put one in a number of other places. I've
got two oil return holes for the turbo that I'm not using, (using only one
for the redrive return) and there is also the spot where the oil injection
pump used to go.
Just a thought.
Brian Trubee
Redmond, Wa
What about the dip stick Brian? :-)
Paul Lamar
Ken Powell wrote:
Why not just drill a hole in the front cover, tap it, and screw in a threaded piece of tubing as the guide for the dip stick?
Ken Powell
kenpowell@aristotle.net
That sounds like that would work if we found just the right place
and you were using an aluminum pan with the sump moved aft.
Here is my latest design for the KIS Cruiser oil pan. Clears under the engine
for the rad. I decided to weld up a new pickup tube and screen for the oil
pump to optimize the pan for an under the engine large rad.
Bruce Frank, please give me a final quote on this and I will give you the
go ahead. Note: two gif's.
When Bruce gets it done we will have pictures of course. (A little pressure
there Bruce :-))
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org