Subject: Cooling blues - resolved?
From: ACRE NL
Date: 6/25/2001, 9:09 PM


Finn Lassen wrote:

I guess I'll never know if the water pump seal failed because of a
defective radiator cap slowly leaking water with subsequent overheating
due to low water level or if would have failed anyway.

Anybody got experience with water pump failures on the 13-B? Rare or
common?

No wobble of the shaft, so must have been just the seal that went bad
and not the bearing.

Finn

Perry thought he had a water pump leak so we got an after market pump.
It was real junk. So Perry bought an official one from Mazda.
It always seemed to me the water pump bearing went before the
seal.

Isn't that cold pressure bicycle pump trick great for finding leaks? :-) :-)


"Perry J. Mick" wrote:
 After my plane incident, the water pump went out in my car!  Same
failure, not the bearing but the seal.  And the car is an '86, same as my
plane.  I think the seals must last 15 years.  I bought a new one from the
Mazda dealer, he had to order it from Mazda because he says they
never fail, so he doesn't stock them.

With a new engine and a new water pump I hope I'm good to go for
quite some time.
--
Perry Mick
Duckt N7XR
http://www.ductedfan.com

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org