tim tracey wrote:
Anybody know what kind of PSRU it was?
tparkes:First tparkes:Last wrote:
The Chevy 350-powered Lancair ES in question used a Northwest Aero belt
redrive. The forward drive bearing overheated (froze up), which
destroyed the drive belt, disconnecting the engine from the prop. While
it was not a very sanitary installation, it had logged over 450 hours,
including several transcontinental flights.
Tom Parkes
Turbo 20B Lancair ES. . . .nearing first engine run.
Bill Freeman wrote:
Is this a outboard bearing at the crankshaft or at the prop shaft?
One of my pet peeves is belt/chain PSRUs with no outboard
bearing at the crank, and of course - an inadequately sized,
lubes, aligned, etc. one is at least as bad. Belts and chains
cause large side loads which seems to be ignored by many
PSRU "designers".
Bill Freeman
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org