Perry thought he had a water pump leak so we got an after market pump.
It was real junk. So Perry bought an official one from Mazda.
It always seemed to me the water pump bearing went before the
seal.
Finn Lassen wrote:
Please explain "junk". Pump looks exactly like the one I removed. Comes with
lifetime warranty.
Isn't that cold pressure bicycle pump trick great for finding leaks? :-) :-)
Yep.
BTW Finn check your cowl pressure at 150 MPH for us.
At what (pressure) altitude?
Finn
The casting was flawed in the seal area to the point that I did not think
it would seal
Sea level.
Paul Lamar
Finn Lassen wrote:
Well, I guess I lucked out on my re-manufactured part from Discount Auto. I pumped
up the system to 16 psi and it held the pressure overnight. I did have to block the
overflow tube as the cap was leaking. Replaced the cap after that.
Sorry, I never fly at sea level! I still like the option of flying high enough to
glide to the airport. 1000' would be as low as I would go and I guess I'd have to
wait till winter to get 1000' pressure altitude.
Finn
Land in the Gulf and wade ashore if you have a problem. It is shallow out
there in the Gulf is it not? You have an ax in the cockpit to chop the canopy
don't you? :-)
OK Finn I will settle for 1000 feet. The pressure you will be measuring
is relative to static pressure anyway.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org